Kolida SDE-28S, Руководство пользователя

Страница: 35 / 80

Fig.3-47 Collection condition
Store setting
—In this store setting interface, we can set the line name, line number and naming
method of points for measurement file according to our needs.
Fig.3-48 Store setting
Name: The line name represents the command prefix for the file, and along with line number
forms the file name.
Number: The line number indicates which file is to be measured, and along with line name to
form the file name, for example, Ln1 and Ln2, where Ln is the line name, and number 1 and
number 2 are the line number.
Default: Each time clicking on the measure button, the line number will increase by one, and the
point number in the file will be counted again from 1, as shown in the figure below, there are 3