Kolida SDE-28S, Руководство пользователя

Страница: 37 / 80

Fig.3-52 Transmit setting
EchoSounder path
—It is the location where EchoSounder software installed.
Fig.3-53 Echosounder path
Correction wizard
—The purpose of correction is to correct the base coordinate from the other
coordinate system to local coordinate system. To activate this function, a GNSS receiver should
be connected and used.
Offsets
—The offset setting is to set the relative offset of the GNSS receiver antenna and the
measuring point in the ship center coordinate system. After the ship's center coordinate system
is established, the position of the GNSS antenna and GNSS measurement point needs to be
calculated into the ship's center coordinate system. In general, if there are 2 GNSS receivers, the
one set at rear of the ship is GPS1, and the one set at front of the ship is GPS2.
Please note that if there are 2 GNSS receivers used to determine the ship’s course, no matter how