Kolida SDE-28S, Руководство пользователя

Страница: 16 / 80

Fig.3-8 Communication setting
1
、
Output Depth, there are two cases here.
At first, when the customer connects GNSS receiver to echo sounder, the echo sounder works as
a computer to run the EchoSounder and Hysurvey software, both of these pieces of software
communicate each other through processes, so we don’t need to do any settings on this part.
Second, if customer runs EchoSounder and Hysurvey software on a laptop or desktop computer,
the echo sounder works as a depth data output device, then the depth data output port should
be set as an external serial port behind the instrument, such as COM11.
2
、
Heave Sensor, connect with heave sensor device to correct heave real time for customer, after
connecting to the sensor, click on port setting to set the port parameters and click modify button
to apply this port, then choose the correct data format.
3
、
Tide Gauge, connect with radio tide gauge to monitor tide real time for customer, after
connecting to the sensor, click on port setting to set the port parameters and click modify button
to apply this port, then choose the correct data format.
4
、
Mark Style, it is to set the mode for mark, here are manual, automatic and timer for option.
5
、
Sounder, it is the inner port for data transfer between the internal boards.
Device Setting
—click on this option to enter the dialog of settings, Survey Mode Setting,
Transmitted intensity and Received intensity are included. It is also a most important setting for
the surveying job.