Kolida SDE-28S, Руководство пользователя

Страница: 29 / 80

Fig.3-36 Device
GPS1 config, click Setup button to enter the dialog, choose GNSS type under the dropdown list, if
the GNSS receiver is an unknown type, choose other option, and use the default data format.
Move to serial parameter tap, choose the correct COM port and baudrate. The parameters of
Parity, Stop bits and Data bits modification should be under the guidance of the professional
technician, generally, all of these parameters are used as default. After that, click Test button to
check if there is data stream comes from GNSS receiver.
Fig.3-37 Device setup