TF.16 IFU StarDevice.003.10-EN 2021-01-12
prepared by Pulavskyi A., Kolyesnik O.
10
ATTENTION! Modification of the product is not allowed!
CAUTION! To avoid the risk of electric shock, the product must only be connected to a
mains supply that has a protective ground.
Disconnect the device from the power supply, before performing any cleaning or
maintenance work. The means of simultaneous electrical separation of the supply circuits
of the device from the circuits of the supply network is the mains switch of the device.
Connect the device only to a working socket with a rated voltage within the range 100 -
240V 50-60Hz. The location of the device should ensure that there is no tension on the
power cord and the manipulator cable, unhindered connection and disconnection of the
power cord from the mains to quick disconnection of the device from the mains in
emergency situations.
Do not allow humidity to enter the electronics housing and the manipulator. Do not expose
the device to dampness, vibration, or shock.
It is prohibited to use the device in a potentially explosive atmosphere, i.e. in the presence
of a mixture of flammable anaesthetic gas with air, oxygen or nitrogen oxide.
It is prohibited to use the device in rooms where flammable and potentially explosive
substances are stored or used.
There is a risk of transmission of germs! Disinfect the tips before and after each use!
It is forbidden to impulse organs containing gas, in particular, lungs.
Therapy with shock waves can make an undesirable effect on a heart. It is necessary to
continuously monitor a patient's condition during the procedure. The patient is allowed to
act no more than 3000 shocks per a treatment session.
