Function introduction
Note:
the basic function listed here shall be operated by remote, other special function shall be adjusted,
activated and deactivated by mobile APP. Scan “Kohler Konnect” or “Feier Smart” QR code to download
APP, complete registration and signin.
Light sensing zone
Side sensing zone
Ambient light
Cover
Flush button
(Short click for flush full, press and hold over
2s for flush ECO).
(Press and hold for 2s to activate emergency
flush after power failure).
Remote docking
station
Remote
Bowl light
Wand
Seat*
Speaker
Microphone
Standby button
Pairing button
Kohler Konnect APP for Android or ISO
Feier Smart APP for Android or ISO
1. Press and hold “ ” button more than 2s to
enter standby mode after one “beep” is
generated. Meanwhile, auto sensing, remote
function and IOT function are deactivated.
Ambient light and toilet light are not lit. Seat
temp raise up, flush function stopped to
minimize energy consumption.
2. When press any button, after cover open or
seat in, all functions will be restored and toilet
auto exit standby mode.
1. Press and hold remote dryer button until front
wash and rear wash indicating LED lights up
in cycle.
2. Press and hold pairing button more than 2s until
one “beep” is generated on remote, which
indicating remote pairing is successful and the
remote is able to operate toilet.
* Antibacterial: the seat contains long term inorganic anti-bacteria material which will inhibit bacteria growth on surface, this does not represent the mildew and other incidental effects.
The antibacterial rate is more than 90%. (Perform test in accordance with GB21551.2-2010 requirements. Testing lab: China household electrical appliances testing institute;
electromechanical products testing technology center of Shanghai Entry-Exit inspection and quarantine bureau.)
Kohler Co.
7
1392138-T01-B
