20
1478624-W2-A
Align ribs on concealing plate parallel
to the tiles and secure the concealing
plate using the four screws provided
in component pack.
Only for Lit Variants
Push the grommet attached to the mixing
valve onto the concealing plate as shown.
Wire can be guided through cut out on
concealing plate to allow for larger wall
cavities.
Attach two or three adjustment screw
depending if installing a dual or triple
outlet product by screwing into the
respective slot using screwdriver.
Screw fully into product until finger tight.
Non Lit products, skip step 22
Push in and fully secure the mixing
valve into the Building in Box using the
provided screws that were removed on
step 16.
DO NOT
use a power driver.
Mixing Valve
Concealing Plate
Seal
Note: DO NOT overtighten the
fixing screws as this may distort
the concealing plate.
Note: Ensure wire is guided through
concealing plate as shown in image.
Use for Dual
Outlet Product
Ribs
Adjustment
Screw
Use for
Triple Outlet
Product
Note: Ensure mixing valve is fully
inserted before screwing into box.
Grommet
Rear View
Concealing
Plate
