For all servicing needs, please contact CUSTOMER SERVICE on:
FREECALL: 1800 800 919 PHONE: 08 6217 0600 FAX: 08 6217 0699 EMAIL: [email protected]
www.aldertapware.com.au
V191007
EEVA WALL BASIN/BATH SETS
EEVA WALL BASIN/BATH SET BACKPLATE – RIGHT HAND
SPECIAL NOTE
Please note that this product has been assembled as a WALL BASIN SET with a 6 litres / min flow regulator
For applications where the flow regulator is not required e.g. BATH, a full flow aerator insert has been supplied
in this box
BRICK VENEER – TIMBER NOGGIN INSTALLATION
Diagram #1 Mark desired position of wall set and fit screw on left hand side of BODY ASSEMBLY
Diagram #2 With the DOTTED LINE on the wall mixer cover at the 12 O’CLOCK POSITION, use levelling
tool as shown and mark the right-hand side screw hole
Diagram #3 Fit all other screws – re-check level
BRICK MASONRY INSTALLATION
Diagram #1 Fix wall set to brickwork with self-tapping screw in 5mm drilled hole
Diagram #2 With the DOTTED LINE on the wall mixer cover at the 12 O’CLOCK POSITION, use levelling
tool as shown and mark the right-hand side 5mm screw hole
Diagram #3 Fit self-tapping screw on right hand side – check level – additional screws not necessary
Assembly is ready to be cemented in position
During cementing, check alignment with levelling tool
NIPPLE
CUTTER
REQUIRED
