19
1478624-W2-A
Remove the cover but do not throw
away as it can still be used to
stop debris during finishing of the
installation.
Cover
Flushing
Cartridge
Yellow Valve
Cover
Seal
Mixing
Valve
Remove the cover from mixing valve.
Apply a small amount of grease from the
pack supplied to the seals. You will need
the remaining grease at later stage.
Make sure the seals are in position before
installing the mixing valve.
Make sure both water supplies are isolated
before removing the flushing cartridge.
Remove the five screws and remove the
flushing cartridge and discard.
Important! Check cleanliness of seals.
Note: Keep the screws for further
installation of mixing valve.
