38
1478624-W2-A
Commissioning
Before turning water back ON, ensure the product is in the OFF position. Turn
product fully anticlockwise, then turn the water back ON.
Maximum Temperature Setting
Before using the shower, the maximum temperature must be checked to make sure
that it is at a safe level. It has been preset to a safe showering temperature under
ideal conditions at the factory, appropriate for most systems. However, site conditions
and personal preference may make it necessary to reset this temperature.
1.
Turn the temperature handle
anticlockwise
until it stops and test that the
temperature of the water from the shower outlet is hot enough.
2.
If not, depress the override button and
carefully
rotate the handle further. If the
water temperature is still not hot enough complete the following procedure.
3.
Rotate the temperature handle back to the override position.
4.
Remove the handle by using the blade on the setting piece, place in between
the bottom of the handle and the shroud and twist to unclip the handle.
Note: Make sure that the hot water temperature is at least 55°C and that
there is sufficient supply.
Caution! Before making any adjustments to the shower, operate the temp
control from max hot to cold and make sure hot and cold water flows
correctly from the shower outlet. After making any adjustments repeat
this process.
Handle
Setting
Piece
