40
1478624-W2-A
The temperature is controlled by rotating
the temperature handle.
Operate the shower and make sure it
delivers cold water initially and then further
rotate to increase temperature, for safety
reasons, the temperature is limited by an
override stop.
Press the override button on the
temperature handle and continue to rotate
the handle to obtain a higher temperature.
Pressing the selected outlet button again
will turn the product off.
User Maintenance
• DO NOT
allow children to clean or perform any user maintenance to the shower
unit without supervision.
•
If the shower is not to be used for a long period, the water supply to the shower
unit should be isolated. If the shower unit or pipework is at risk of freezing during
this period, a qualified, competent person should drain them of water.
Temperature
Override
Increase Temperature
Decrease
Temperature
Temperature
Selector
Handle
Warning! Please observe the following to reduce the risk of injury or product
damage:
The button graphics come in set positions,
if this is not suitable for your installation,
use the button cap removal tool to remove
the cap and swap the caps over.
Button Replacement
