24
1478624-W2-A
Push fit the handle ensuring that the override button is set at 12 O’clock position and
the lug on the inside of the handle matches up with the slot available on the valve.
Note: Position of "TOP" area on the valve may not be facing upwards and
MUST to be manually rotated into the position shown.
Note: This completes the initial installation of the mixing valve. Complete
the shower fittings installation then go to commissioning section.
Note: If outlet does not turn off or insufficient water
flows from the product, refer to commissioning
to remove the handle and shroud and re-set the
adjustment screw height following installation
step 23 & 24.
Note: If button operates wrong outlet, refer to "Button Replacement" section.
Front View of Valve
Handle
Override Button
Internal View of Handle
Lug fits into Slot
on the valve
(Highlighted for
reference)
Ensure water supply is turned on.
Operate one button and confirm the correct outlet flows water.
Press the same button again and confirm the outlet turns off.
Complete for all buttons on product.
