Safety Precautions and Instructions V
TP-5672 11/95
Hazardous voltage can cause severe injury or
death.
To prevent the possibility of electrical shock,
de-energize the normal power source to be connected
to the transfer switch before making any line or auxiliary
connections.
Hazardous voltage can cause severe injury or
death.
De-energize both normal and emergency power
sources before proceeding. Move generator set master
switch on controller to OFF position and disconnect
battery negative (--) before working on transfer switch!
Turn the transfer switch selector switch to the OFF
position.
Hazardous voltage can cause severe injury or
death.
Disconnect inner panel harness at in-line
connector. This will de-energize circuit board and logic
circuitry, but allow transfer switch to continue to supply
utility power to necessary lighting and equipment.
Hazardous voltage will exist if any accessories mounted
to inner panel are NOT wired through the inner panel
harness and de-energized by in-line connector
separation. Such accessories are at line voltage.
