Kohler KD83V16, Руководство по обслуживанию и ремонту

Страница: 73 / 300

Service and Repair Manual Repair
Rocker arms
u
Pass flywheel groove index 1 .
Step 8
u
Stop at flywheel groove index 2 .
u
Set valve clearance for cylinders A1 , A2 and B5 , B7 . (For more information see: Checking valve
clearance, page 74.) , (For more information see: Setting valve clearance, page 74.)
Step 9
u
Pass flywheel groove index 6 .
Step 10
u
Pass flywheel groove index 3 .
Step 11
u
Stop at flywheel groove index 4 .
u
Set valve clearance for cylinders A4 , A6 and B1 , B3 . (For more information see: Checking valve
clearance, page 74.) , (For more information see: Setting valve clearance, page 74.)
Valve set order (alternative method)
Information
There is a marking on the flywheel to set the valve clearance.
The marking may become illegible.
The only possibility is to set by overlap position.
Ignition TDC* A1 B7 A2 B5 A4 B3 A6 B1 A8 B2 A7 B4 A5 B6 A3 B8
Overlap TDC** A8 B2 A7 B4 A5 B6 A3 B8 A1 B7 A2 B5 A4 B3 A6 B1
* Ignition order
** Opposite cylinder (overlap)
Tab. 15: Valve set order
u
Set cylinder to overlap TDC position.
u
Adjust valve clearance of ignition TDC cylinder.
KD83V16 33525088901_2_1 EN_US
2021-07
© 2021 by Kohler Co. All rights reserved.
73