Kohler KCP MPAC 1000, Эксплуатация и установка

Страница: 9 / 76

TP-6126 8/02 i Introduction
Introduction
This manual provides operation and installation
instructions for Kohler
r
Model KCT/KCP automatic
transfer switches with MPAC 1000
t
electrical controls.
t:in:002:001a
Information in this publication represents data available
at the time of print. Kohler Co. reserves the right to
change this literature and the products represented
without notice and without any obligation or liability
whatsoever.
Read this manual and carefully follow all procedures
and safety precautions to ensure proper equipment
operation and to avoid bodily injury. Read and follow the
Safety Precautions and Instructions section at the
beginning of this manual. Keep this manual with the
equipment for future reference.
The equipment service requirements are very important
to safe and efficient operation. Inspect parts often and
perform required service at the prescribed intervals.
Obtain
service from an authorized service
distributor/dealer to keep equipment in top condition.
x:in:002:002
List of Related Materials
This manual includes operation and installation
information for standard open-transition and
programmed-transition transfer switches. Decode the
transfer switch model number from the transfer switch
nameplate and verify that the it matches the model
shown on the front cover of this manual before
proceeding with installation.
Separate manuals cover service and parts information.
The following table lists the related literature part
numbers.
Literature Item Part Number
Specification Sheet G11-80
Service Manual TP-6127
Parts Catalog TP-6158
MPAC
t
Setup Program Operation Manual
TP-6135