如何转换成恒温阀感应龙头
(
若用户另购恒温阀
16294T-3-CP,
具体安装详见其说明书
)
注：三通、角阀请用户自备。
清理说明
安装结果检查
检查并确保所有衔接处都已拧紧，打开排水系统
和主要供水源，检查并修理有漏水的接口。
INSTALLATION CHECKLIST
Check and ensure that all connections are tight. Open the
drain. Turn on main water supply and check for leaks.
Repair leakage when necessary.
CLEANING INSTRUCTIONS
Applicable for all finishes: clean faucet surface with a mild
soap, then wipe entire surface completely dry with a clean
soft cloth. Most cleaners may contain chemicals, such as
ammonia, chlorine, toilet cleaner etc. which could adversely
affect the surface and it is not recommended for cleaning.
Do not use
abrasive cleaners or solvents on Kohler
faucets and fittings.
HOW TO CHANGE TO A THERMOSTATIC
SENSOR FAUCET
(If users
purchased
the
thermostatic valve 16294T-3-CP,
please
refer to
the
installation guide
16294T-3-CP)
Note: Please prepare the tee and stop valve accordingly.
8
1380339-T01-A
接感应龙头
Connect Sensor Faucet
恒温阀
thermostatic valve
MIN 50mm
墙面
Wall
墙面
Wall
三通
Tee
角阀
Stop Valve
角阀
Stop Valve
三通
Tee
出水口
Outlet
三通
Tee
进热水
hot
进冷水
cold
适用于所有加工处理过的表面，以中性肥皂水清
洗龙头表面，再以干净的软布彻底擦干整个表
面。许多清洁剂，比如氨水，去污粉及洁厕灵
等，会对龙头表面造成伤害，切忌使用。
有腐蚀性的清洁剂或溶剂不可使用于科勒的水龙
头及其配件上。
不能使用百洁布、钢丝球等硬质清洁材料擦拭龙
头。或使用干的纸张擦拭，避免划伤龙头
整
体
表
面
。
Do not wipe faucet with hard cleaning materials such as
scrubbing pads, steel wool etc. or use dry paper to wipe
faucet so to avoid scratching the surface.
