1380339-T01-A
5
(22)
(23)
三 安装皂液器
1.
在墙壁合适的位置钻孔，打入膨
胀管，再用螺钉将皂液器支架固定
在墙壁上
（见图1）
。
2.
将皂液泵连带皂液瓶扣紧在支架
上
（见图2）
。
3.
将龙头皂液软管连接到皂液泵上
（见图3）
。
22
Apply plumbers putty
23
(22)
(24)
(25)
(26)
25mm 55mm
(23)
(24)
注意：
注意：
Note:
Ensure cylinder install on water inlet.
3.
Install soap dispenser
1. Drill the mounting holes properly, place
expansion tube, and then mount the soap
dispenser on the wall by screws (Fig.1).
2. Mount soap dispenser pump and soap
bottle on the bracket (Fig.2).
3. Connect faucet soap hose to soap
dispenser pump (Fig.3).
4.
How to Install the Drain
Unscrew the drain flange ( 22) from
drain assembly. Apply plumbers
putty around the bottom circle. Insert
drain body (23) into lavatory from the
underside.
Screw the drain flange ( 22) into drain
body (23). Tighten the locknut (24)
manually from the underside.
Note: Remove excessive putty. Note:
after tightening locknut (24), do not
adjust drain body position, otherwise
putty seal might be damaged.
Connect the tailpiece( 25) to the
trap(26). The tailpiece should ex tend
25mm to 55mm into the trap.
94.3
11.3x2
2-R2.15
Fig.1
图
1
94.3
Fig.2
图
2
Fig.3
图
3
