- 17 -
Note 1:
(normal) is a calculated flow rate value for 0℃ 101. 325 kPa (abs).
2: FS flow rate indicates the maximum flow rate of the flow meter range.
3: RD stands for "reading".
4: A minus (−) flow rate value indicates a back flow rate (flow in the direction opposite that indicated by the flow meter arrow).
5: Regardless of the unit of display and the decimal point position, this indicates resolution from the lowest display digit.
6: A flow rate inside of parentheses ( ) is for installation attitudes 2 and 3.
7: This accuracy is a value representing instantaneous flow rate display accuracy along with instantaneous display repeatability.
8: See the installation attitudes on page 4.
9: Replacing the bypass unit with a new unit causes instantaneous flow rate display accuracy to become ±5
%
FS ±1 digit. (FAS-030, FAS-060, FAS-120)
10: The back flow side cannot output.
11: Back flow side settings cannot be configured.
0.4
0.4
0.5
0.7
1.1
Specifications
FAS-002
FAS-005
FAS-030
FAS-060
FAS-120
Model
Item
Data recording
Insulation resistance
Cable
Installation attitude
Protective structure
Gas contact portion
Main channel
material
Bypass unit
Gasket
Bypass unit case material
Load mass
kg
Semiconductor non-volatile memory EEPROM
Recorded data: Function settings, parameters, integrated values, etc.
50 MΩ min.
Between connector pin and main channel or mounting bolts by 500VDC megger
Option (with connector, oil resistant, flame retardant cable UL2464 EN standard)
See "Installation attitudes" on page 4.
IP65 (JISC0920 and IEC529) splash-proof and dust-proof construction assuming indoor installation.
Aluminum alloy (anodized)
SUS304, PBT, H-NBR (hydrogenated nitrile rubber)
H-NBR (hydrogenated nitrile rubber)
Modified PPO
Order Codes
Additional Parts
●Bypass unit
(
For use with FAS-030, -060, and -120 only.)
FAB
■
Cable
with connector (Yamatake Corporation)
FAK-2L
FAK-5L
(Cable length: 2000 mm)
(Cable length: 5000 mm)
FAS
-
-
-
-
Mounting bracket
Note
Blank: None
B: With mounting bracket
Note: Mounting bracket is available for FAS-002, -005, and -030 only
Flow rate range
002: 0 to 200
ℓ
/min (normal)
005: 0 to 500
ℓ
/min (normal)
030: 0 to 3000
ℓ
/min (normal)
060: 0 to 6000
ℓ
/min (normal)
120: 0 to 12000
ℓ
/min (normal)
Flow Meter
FA Series
Connector cable length:
Blank:No cable
2NL :2000 mm
5NL :5000 mm
Inspection Certificate of
Verification
Blank: None
T: With Inspection
Certificate of Verification
●Mounting bracket
(
For use with FAS-002, -005, and -030 only.)
B-FAS