Koehler K71000, Руководство по эксплуатации и инструкция

Страница: 16 / 42

K71000 Automatic PMCC Flash Point Analyzer
Operation and Instruction Manual
K71000-Manual
- 14-
1. Power Button: This button allows the user to turn the instrument on and off from the front side. The
main power switch at the back of the unit (Figure 2, Item 12) must be switched ON prior to pressing
on the power button.
2. Emergency Fire Suppression Button: Pressing this button initiates the integrated Fire Suppression
System. While depressed, turning the button clockwise will release button and reset.
NOTE: Inert Gas must be connected to secondary gas port located at the back of the
instrument for fire suppression system to function properly.
3. USB Connection Port: For connection of USB device to export test results, save software
screenshots and upload factory software updates.
4. Touch Screen Control Panel: Main control point of instrument. Please refer to section _._ for full
operational details.
5. Leveling Feet: To make adjustments to instrument level for proper operation.
6. Ignitor Flame Adjustment Knob: Controls gas flow to ignitor Flame for fine tuning flame size in
accordance to test method.
7. Pilot Flame Adjustment Knob: Control gas flow to pilot flame for fine tuning pilot flame size. Pilot
flame is designed to ensure ignitor flame remains lit during entire testing procedure.
8. Ignitor Connection Port: For connection of gas / electric ignitor assembly to instrument
9. Spill Guard: To prevent sample from spilling or leaking on Touch Screen Control Panel
10. Draft Shield: Provides user protection from test area. Protects test flame from external draft source
11. Test Cup: Brass test cup equipped with heat resistant handle. Test cup locks in place for sample
stabilization during testing.