Koehler K71000, Руководство по эксплуатации и инструкция

Страница: 14 / 42

K71000 Automatic PMCC Flash Point Analyzer
Operation and Instruction Manual
K71000-Manual
- 12-

Distilled fuel must be wiped off of instrument
work surfaces and not be allowed to collect.
This is a flammability hazard and collects
dust.

Free of Corrosive Fumes

No Direct Sunlight

Not near heating or AC ventilation ducts

No Vibrations

Clearance from other instruments so as to
not influence instruments ambient conditions

Height of bench top must allow for easy
viewing and use

Temperature Range:15 to 35°C (59 to 95°F)

Maximum Rate of Change: 6°C (10°F) / hr

Elevation to 2000 meters

Relative Humidity: < 80%, non-condensing
NOTE: No warranty provision is made to
cover instrument failure due to environmental
conditions outside the above mentioned criteria.
No warranty is provided that the instrument will
produce acceptable results outside the above
mentioned criteria.
Ventilation.
A fume hood or exhaust system is
required after performing a test. Flammable
vapors and/or steam are generated during
operation and must not be permitted to
accumulate. A canopy-style hood may be used if
the height from the top of the unit to the canopy
is 5 feet or less. The exhaust blower should
have a rating of 1000 C.F.M. or greater.
Power:
Connect the line cords to properly fused
and grounded receptacles with the correct
voltage as indicated in section 1.3 or on the
back of the unit. A switch located on the back of
the unit allows the user to switch the input
voltage to either 115VAC or 230VAC.
WARNING: Ensure the voltage type
selected on the back of the unit matches the
plug type used when powering the instrument.
WARNING: For safety, disconnect the
power when performing any maintenance and/or
cleaning.
Do NOT turn the power on unless the
bath is filled with the proper medium; otherwise,
damage may occur to the unit and the warranty
will be void.