9
INTRODUCTION
Please read and follow any and all specific
warnings
,
cautions
and
notes
that
are contained in this manual.
KEM Equipment, Inc. is pleased that you have selected a Kodiak engine for your
requirements. KEM Equipment, Inc. takes great pride in our tradition of quality
products produced from the GM Powertrain line of marine gasoline fuel engines.
KEM Equipment, Inc./ Kodiak Marine reserves the right to request any pertinent
Maintenance information of your engine prior to authorization of warranties.
Overall safety and equipment reliability depend on continuous observation of
sound operating practices. Always observe required scheduled maintenance
activities as outlined. Never attempt to correct problems or repairs for which you
are not qualified. At the end of this manual, you will find a list of qualified Kodiak
marine service dealers to assist you in your area.
Always STOP the engine before refueling.
Always STOP the engine prior to any inspection / check or repair work.
Always maintain proper ventilation when working around gas or oil.
Always run the bilge blower for a minimum of 10 minutes prior to starting
the engine.
Do not stand close or hover over the engine prior to starting.
Ensure all safety guards are in place prior to starting the engine.
All KEM Equipment, Inc. engines are inspected and tested before leaving the
factory. However, certain checks should be made before placing the engine into
regular service.
Please read the initial start-up inspection requirements in the Maintenance
section of this manual.
KEM Equipment Inc. reserves the right to discontinue models or accessories at
any time or to change specifications or designs without notice and without
incurring obligation.
