Koden MDC-5004, Руководство по установке

Страница: 76 / 156

Chapter 4 Setup after installation MDC-5000 Series
4-22 0092653004-00
Select [MAINTENANCE] => [I/O] => [KGC SET] => [BRG CORR] =>
(2) Select the last digit of entry frame for a numerical value, then press ENT key after pointing at the
angle to be compensated by moving the joystick up and down.
4.2.12 Serial monitor
Serial input signals can be checked by the window of serial data monitor.
Press MENU
key to display “Menu”.
Select [MAINTENANCE] => [I/O] => [SERIAL MONITOR] => select [J3], [J5], [J6], [AIS] or [ALL] =>
Input data of selected port will be displayed.
[AIS] port means AIS data from AIS device.
[ALL] means that the data of all ports will be displayed at the same time.
4.3 Setup SECTOR MUTE mode (Cannot use while transmitting)
SECTOR MUTE is the function enabling user to stop transmission to designated direction when there
are hazardous objects near antenna location or near a human body.
When using SECTOR MUTE, it takes longer time to detect optimum value in auto tuning at the start of
transmission and change of range. Therefore manual tuning is recommended to use when using
SECTOR MUTE.
SECTOR MUTE mode ON or OFF
Press MENU
key to display “Menu”.
Select [MAINTENANCE] => [SECTOR MUTE] => [MUTE] => [ON or OFF] => and press ENT key.
Setup starting angel setup of SECTOR MUTE
Press MENU
key to display “Menu”.
Select [MAINTENANCE] => [SECTOR MUTE] => [START] => select 0 to 359°, and press ENT key.
Setup ending angle of SECTOR MUTE
Press MENU
key to display “Menu”.
Select [MAINTENANCE] => [SECTOR MUTE] => [END] => select 0 to 359°, and press ENT key.
>ALL
J3
J5
J6
AIS