CVG-200
Chapter 6
Using the Menu
0093132802-05
6-17
Vertically split
Horizontally split
depicted using white (or green) and black marks.
6.2.3.9
Image Speed
Sets the speed for sounder imaging.
Setting Range
：
4/1, 3/1, 2/1, 1/1, Stop, 1/2, 1/3, 1/4, 1/6, 1/8, 1/12, 1/16
1/1: For each transmission signal sent out, 1 line is displayed.
Stop
：
Sending of sounder images is stopped.
*/1: For each transmission signal sent out, * lines are displayed.
1/*: For * transmissions signal sent out, 1 line is displayed.
When multiple lines are displayed for 1 transmission signal, received signal lines are widened to
detect even small schools of fish. This function helps to prevent schools of fish being overlooked.
Conversely, when 1 line is displayed for multiple transmissions, small schools of fish are intentionally
overlooked.
6.2.3.10
Image Direction
Selects the direction of image movement.
Selection:
←
｜
←
｜
,
←
｜
→
←
｜
←
｜：
Images begin on the right-hand side and are displayed leftward.
←
｜
→
：
Images begin in the center and are displayed outward.
In the dual frequency mode, this direction setting is only applicable in normal and vertical partitioned
screen settings. In all other cases, imaging flows to the left.
6.2.3.11
Image Partition
Sets the direction of image partitioning.
Selection: Vertical, Horizontal
Vertical
：
The screen is split vertically, creating a left-hand side and a right-hand side.
Horizontal
：
The screen is split horizontally, creating upper and lower screens.
6.2.3.12
Image Swap
This function allows the swapping of the dual images: left side and right side, or upper and lower.
Selection: A|B, B|A
