CVG-200
Chapter 6
Using the Menu
0093132802-05
6-35
6.3.5.3.2.3
Waypoint Erase
Select a route number and the waypoint to be deleted, and delete it by the following procedure:
(1) Select the number of the route containing the waypoint to be deleted and press:
(2) Select the number of the waypoint to be deleted.
(3) Press
to confirm the deletion of the waypoint.
(4) Press
to complete the deletion of the waypoint.
6.3.5.3.2.4
Comment Edit
Editing a comment corresponding to a selected route number can be done by the following procedure:
(1) Select the route number of the comment you wish to edit and press:
(2) Enter a new comment or revise the already existing one.
(3) Press
to confirm the edit.
(4) Press
to complete the edit and exit.
6.3.6 Track Store
The current track shall be stored in a designated block.
Setting Range: Block 1-Block 7
Up to 7000 track plots may be stored in each of the Blocks 1-7. Once stored in the memory, this data
will not be lost even should the batteries for the memory unit run out.
The user is advised to erase any unwanted or unnecessary tracks before commencing any track
storage.
6.3.7 Track Recall
Recall data that has been stored from one of the blocks (1-7) selected by the user.
Setting Range: Block 1-Block 7
Please re-designate the block from which you recalled the data from should this data not be the one
you wanted. This unwanted track can be deleted from the screen.
