Chapter 5 CVG-200
Basic Operation
5-42 0093132802-08
Yellow Marker
Zoom Range
Green Marker
50.0
200
0
100
50
60
70
ZM
High
170
5.5.6.2
Horizontal Partitioning
(1) Push and select Part Expansion of High (or Low) Frequency Mode.
(Refer to Sounder Imaging Display Procedure, section 5.4.1.3.)
(2) Set the zoom range.
(Please refer to Imaging, section 5.4.1.2.)
(3) Push and turn over the numerical display of the Green Marker.
(To change the numerical display of the Yellow Marker,
push once again. )
Operate the Green Marker by the Control knob, and
set the upper depth of the zoom range.
In the right figure, the high (or low) frequency normal
imaging is on the upper side, and the lower side
displays the part expansion image. The position of
the magnification pictured here is 50, while the zoom
range is set at 20.
VRM
MODE
Zoom Mark
VRM
