![Koden CVG-200 Скачать руководство пользователя страница 45](http://html1.mh-extra.com/html/koden/cvg-200/cvg-200_operation-manual_1984714045.webp)
Chapter 5 CVG-200
Basic Operation
5-14 0093132802-08
5.4.7.4
Storing Events
Storing events may be labeled as Mark 00 to Mark 99. This information can be displayed on the top
of the screen. The number of the mark being reported on can be changed.
To utilize this function, the procedure outlined below must be done beforehand:
(1)
→
“Plotter”
→
“Mark Block Number”
→
“
Choose 00000”
→
[Set]
→
(2)
→
“Plotter”
→
“System Settings”
→
“Event Store”
→
“Choose 0 ~ 99”
→
[Set]
→
After performing the procedure above, pressing the mark registration button
or
shall cause the event information window to appear in the upper right-hand corner of the plotter.
Information on the specified mark shall appear in the event information window.
When a mark is registered, the following information is displayed: bearings and distance from the boat,
mark shape, mark number, and the latitude/longitude of the mark. Also, when date and time are
added from an external source, this information is also displayed.
When the event information window’s frame is red, the number of the mark can be altered.
Pushing
on the directional key increases the mark number, while pressing
on the
directional key lowers the mark number. Any number between 00 and 99 are valid. When a
displayed mark appears on the plotter, it shall blink. Should 5 seconds pass without further changes,
the window frame shall turn black, signaling that changes to the mark number are no longer possible.
To once again change the mark number, press
. The window frame shall turn red, and the
mark number can again be altered. Also, to remove the event information window, press .
When entering information regarding an event, external fish finder entries and NMEA0183TLL
sentences from POB from radars are acceptable. A red star mark (
☆
) is displayed when a TLL
sentence signal is received. When the user wishes to only accept TLL sentences, set the Mark Block
number to something besides 00000.
Bearing
---.-°
Distance ---- nm
00
--/--/--
--:--:--
--
°
--.---
---
°
--.---
Mark not registered
Bearing
---.-°
Distance ---- nm
00
04/07/01
05:30:00
36
°
00.000N
138
°
00.000E
Mark registered