LED behaviors
Status messages
Unit status or possible causes
Refer to
and
blink as pattern 1
This error is
displayed when
printer is
unrecoverable.
Software Update failed.
–
If this error has occurred, visit our website at
www.kodakverite.com/ support for the latest
troubleshooting.
and
blinks as pattern 1
Paper Jam:
Unplug and replug
the power cable.
A paper jam has occurred inside of the unit.
–
Firmly grasp both sides of the paper, then gently pull it out.
Press and hold (Power/Standby) longer than 3 seconds
to turn the unit Off (Standby). Unplug the AC plug.
Wait at least 30 seconds, then reconnect the AC plug back
into the AC socket.
●
If this error occurs occasionally, visit our website at
www.kodakverite.com/support
for the latest
troubleshooting.
●
If you cannot solve the problem, disconnect the AC
plug and contact an Authorized Service Center.
and/or
blink as pattern 6
blinks as pattern 1
Check cartridge
lock
An ink cartridge is not installed correctly.
–
If the packaging paper is stuck in the Ink door, remove it.
–
Reinstall the cartridge, then close the lid completely.
●
Confirm the ink cartridge is correctly installed, then
press (Power/Standby).
and
blink as pattern 6
blinks as pattern 1
Remove and re-
insert both black
and color ink
cartridges.
Soiled or unsupported ink cartridge(s) has been inserted.
–
Clean the surface of the nozzles and contacts on the Ink
cartridge(s) with a dampened soft cloth then let them dry
before reinserting cartridge(s).
–
Replace the current Ink cartridge(s) with an authorized Ink
cartridge(s).
and
blink as pattern 6
blinks as pattern 1
Both inks are
empty.
The ink is empty in the ink cartridge(s).
–
Replace with a new Ink cartridge(s).
●
Order new Ink cartridge(s) from our website at
www.kodakverite.com
and/or
blink as pattern 6
blinks as pattern 1
No Ink detected
No ink detected.
–
Remove and reinstall the Ink cartridges.
–
Make sure the Ink cartridges are inserted correctly.
–
Clean the surface of the nozzles and contacts on the Ink
cartridges with a dampened soft cloth then let them dry
before reinserting cartridges.
and
blink as pattern 6
blinks as pattern 1
Both Inks Error
Ink cartridges error.
–
Clean the surface of the nozzles and contacts on the Ink
cartridges with a dampened soft cloth then let them dry
before reinserting cartridges.
–
Replace the current Ink cartridges with authorized Ink
cartridges.
●
If this error occurs occasionally, try to replace the
current Ink cartridges with new Ink cartridges.
and
blink as pattern 4 and
blink as pattern 4
Both ink levels are
low.
Both inks are low in the ink cartridges.
–
You should purchase a new Ink cartridges.
●
Order new Ink cartridges from our website at
www.kodakverite.com
-
60
English
Continued on next page.