Kodak Truper 3210 Скачать руководство пользователя страница 120

Страница: 120 / 144

www.kodak.com/go/docimaging

120 of 144

Ink Cartridge Installation and Printing Position

Safety Precautions

Before installing the ink cartridge, please note the following precautions and instructions:

•

Do not touch the print head with your hands or with a dirty object.

•

Do not subject the ink cartridge to shock.

•

If the date marked on the ink cartridge box has expired, the print quality may be affected.

•

If the ink cartridge is used six months after unpacking the unit, the print quality may be affected.

•

Be sure that the storage temperature is between 32°F and 104°F (0°C and 40°C).

•

Store the ink cartridge away from direct sunlight.

•

Do not clean the ink cartridge with alcohol.

Warning

•

Do not disassemble the ink cartridge.

•

Do not let the ink come into contact with your skin.

•

If the ink comes into contact with eyes, rinse the area completely with fresh water. If irritation or
pain remains after rinsing, consult a doctor immediately.

•

Keep the ink cartridge out of children's reach.

•

Do not dispose of the ink cartridge in fire.

Installing the Ink Cartridge

Remove the protective tape from the ink cartridge.

Содержание Truper 3210

















































































































































Результаты поиска

Содержание Truper 3210

Отзывы:

Похожие инструкции для Truper 3210

Бренды по названию

Популярные бренды

Kodak Truper 3210, Руководство оператора

Результаты поиска

Содержание Truper 3210

Отзывы:

Похожие инструкции для Truper 3210

Бренды по названию

Популярные бренды