www.kodak.com/go/docimaging
100 of 144
Sleep Mode
To conserve energy and reduce operating costs, the scanner has a programmable power save feature.
The scanner’s factory setting is as follows: The power save feature is enabled with a waiting time of 15
minutes, so that the Sleep Mode goes into effect after 15 minutes after the last scanner operation. This
setting complies with ENERGY STAR requirements.
Click the
Sleep Mode
button to change the settings:
•
When the
Sleep Mode
check box is selected, the Sleep Mode is enabled. To disable this
feature, clear the check box next to
Sleep Mode
, then click
OK
.
•
To change the waiting time until the Sleep Mode goes into effect, be sure the Sleep Mode check
box is selected, adjust the minutes in the
Waiting Time
box, then click
OK
. (The waiting time
can be set from one to 60 minutes in one-minute increments.)
•
If you do not want to change the settings, click
Cancel
.
Clean Imprinter
The Clean Imprinter button is enabled only when the imprinter is installed in the scanner. If the imprinter ink
cartridge is clogged, first close the imprinter door, then click the
Clean Imprinter
button to clean the
cartridge. The unit will perform an automatic cleaning function to improve the print quality.
Paper Mode/Buzzer Setting
The scanner can alert you with a buzzer when it detects a designated paper size. Click the
Paper Mode/
Buzzer Setting
button to change the settings:
•
In the Paper Mode section, select the size of paper to be detected by the paper guides:
A4
or
Letter
size.
•
In the Buzzer Setting section, select
ON
or
OFF
, then click
OK
.
•
If you do not want to change the settings, click
Cancel
.
