Kodak Miniloader 2000 P, Руководство по обслуживанию

Страница: 105 / 112

5. RESIZING MAGAZINES
The following SIZE CONFIGURATIONS are possible:
18 x 24 cm MAMMOGRAPHY FILM
24 x 30 cm MAMMOGRAPHY FILM
8 x 10 inch CRT FILM
It is also possible to code each FILM SIZE from the list above as a TYPE 2 FILM to use two
different TYPES OF FILMS of the same SIZE in the ML2000 ( ML2000 P).
To change MAGAZINE SIZES do the following:
1
. Place the MAGAZINE on a flat surface.
2
. Place the REFLECTIVE STICKERS for SIZE Coding as shown.
FILM SIZE REFLECTOR B1 REFLECTOR B2 REFLECTOR B3
REFLECTOR B4
(TYPE 2)
18 x 24 cm M YES no no no
18 x 24 cm M #2 YES no no YES
24 x 30 cm M YES YES no no
24 x 30 cm M #2 YES YES no YES
8 x 10 in V no YES no no
8 x 10 in V #2 no YES no YES
3
. Remove the TOP COVER of the MAGAZINE.
4
. Place the SEPARATORS L, R and REAR in the RECESSES corresponding to the
selected FILM SIZE. See the drawing on the next page. The RECESSES are marked
with the FILM SIZE. For 8x10 in use the SEPARATOR with the LABEL on.
Note:
Make sure that SEPARATOR Left and SEPARATOR Right are mounted correctly with the long
STUD towards the HANDLE. OTHERWISE it is impossible to close the MAGAZINE and then all
the films will fall out when the MAGAZINE is carried.
REFLECTIVE STICKERS
REFLECTIVE STICKER
MAGAZINE CLOSED
B1
B2 B3
B4
figure 5-1
SM 3477 MAGAZINE SIZE
KODAK AG Stuttgart 5-1 6/1997