background image

22

_www.kocom.com

Security Home Auto System_

23

Detoured Communication with Common Gate

Telephone Call

If guard button is pressed at a house when detoured communication is being made between

guard and a visitor? 

When call connection is made between guard and a 

visitor at common gate, guard notice to a visitor that 
user is now absent. 

When 

guard

button is pressed 

at

a house, call signs are heard at 

guard. 

Simultaneous calls from outside telephone line, guard and front door 

(communication with two parties at a time is unavailable)

Priority Call

In case of simultaneous calls from outside 

telephone line, guard and front door (called 
LED flickers), the first pressed button among 
Telephone line, guard and front door is first 
linked.  

For telephone call connection, press the "talk" button 

(Telephone line LED is turned on). 

In the case of simultaneous calls from Telephone line, guard and front door, 

outside telephone call among them is automatically connected with first priority. 

After outside telephone call is ended, pressing the 

talk

button, 

guard and front door are connected in order (Telephone line LED is turned off).

Simultaneous calls from guard and front door

In case of simultaneous calls from guard and front door 

(LEDs of guard and front door flicker), the first pressed 
button between the two is first linked. 

Pressing the "talk" button, communication with 

guard becomes available (Guard LED is turned on). 

Operation in Call during the Communication

Call from outside telephone line during the 
communication with guard or front door

Call from front door camera during the outside 

telephone call

For communication, press the 

"Telephone line" button.   

�F

or communication, press the 

Lobby/Front Door

button.

In absence, a visitor calls to house at the common gate camera

If a visitor calls to house at the camera of common gate 

and the equipment is set at 

Absence

mode while user is 

absent, call signs are also heard at guard.

When call connection is made between guard and 

a visitor at common gate, guard notice to a visitor 
that user is now absent. 

When telephone rings, pressing the 

Telephone line

or 

talk

button, communication becomes available. 

For outgoing call, press the 

Telephone line

button and telephone

number 

in order.

Sensitivity of outside telephone line may vary according to the user

environment.
During the telephone call, properly adjust the call sensitivity using 
up/down key. 

UP/DOWN

T e l e p h o n e
line

Lobby /
Front Door

Telephone line/
Lobby/Front Door)

talk

talk

guard or 

front door 

Absence

guard

Telephone

line

Содержание KHV-446S






















Отзывы: