background image

Product Features

Main Body

1. Bus type wiring that is adopted for connection between monitor and guardroom makes 

product installation easier. 

2. Since the product is adjusted to AC 220V or AC 110V, no additional DC adapter is needed.

Instructions for Right Use

Do not place the product near humidifier or heater. High temperature and humidity may 

cause unexpected mechanical troubles of the product.

Do neither drop main body and front door camera nor great impact on them.

Do not close main body to the equipment emitting strong magnetic force 

(TV, speaker, etc.) 

(It may cause trembling or distortion of screen image which result in breakdown.)

In cleaning, do neither contact the product with wet hands nor use volatile substances such 

as benzene or thinner.

To maintain high-definition of screen image, wash main body and window part of camera 

from time to time.

As this equipment is an electronic precision instrument and high-voltage occurs in its 

interior, do not disassemble the equipment arbitrarily. 

All the above-mentioned cases constitute the causes of product

s breakdown. 

Pay attention to these instructions when handling the product. 

Instructions for Installation

Appropriate circuit breaker should be installed in interior wiring part of building.

When disconnecting power cable form connector, fix the cable not to contact with second-

order side or case.

The color of GND wire should be green or yellow and be fixed to chassis 

(GND-marked position) using washer with proper elasticity together. 

8

_www.kocom.com

Security Home Auto System_

9

Components

Main Body Components

Front Door Camera Components

Components for the installation of 
concealed type box excluded from    
package. If necessary, call to 
selling store. 

Product Configurations

Concealed 

Box

8 Kinds of 

Connectors

Vis for fixing camera to the support 

of main body

Vis for fing camera to the wall peg

fing camera peg

Power Terminal

Single-hole Switch Box 

Power Supply Unit

Fire and Gas leakage prevention function 
are excluded from KHV-446T and 456T.

KHV-446ST/456ST as standard. 
Functions vary according to 
specifications of each product.

Some components are excluded from   
package or sold separately. 

Antenna is only included in

KHV-446ST and 456ST.

Содержание KHV-446S






















Отзывы: