background image

Automatic Opening the Front Door (Optional)

Call using Direct Dialing System (Call between houses)

This function becomes available only when opener is installed at common or house front door and 

connected to main body. (Only DC opener can be used.)

Pressing the 

door open

button during the 

talk with common or house front door, 
common or house front door is opened, respectively.

20

_www.kocom.com

Security Home Auto System_

21

Call from House to Guard

* This function becomes available only when guard equipment is installed. 

Call from Guard to House

Bell of front door or outside telephone line rings during the communication between house and guard

Communication with Guard (General Function)

Call  sign  rings  at  the  main  body  for  house.  Then,  pressing  the 

talk

or 

guard

button,  communication  with  guard  becomes

available. 

After you press the guard button and 
guard respond to your call, communication 
with guard becomes available. 

When communication between house and 
guard exceeds 5 minutes, communication is 

automatically ended.

When front door or telephone bell rings during the 
communication between house and guard, 
press the function button of flickering LED for 
communication. 

door open

guard

Telephone line

In direct call to other household, internal line LED continues to flicker until the other side receives call. If the other side does not 

receive the call, internal line LED is turned off after 30 seconds. 

Press the 

internal line

button on main body.

Within 5 seconds, press the numbers of building and house to be called. 
After 5 seconds from pressing the 

internal line

button, call connection is ended. 

If calling again, after pressing the 

internal line

button, press the number of building and house to be called.

Ex) Call to House No. 302 in Building 102
0+1+0+2[4 digits of building No.]+0+3+0+2[4 digits of house No.] Pressing 4 digits of building No. and 4 digits of house No. in 
order, call to the concerned house becomes available.
(Call to administration office: when system is installed in integrated administrative office): Pressing the guard button for 
more than 3 seconds, integrated administration office is called. 

Call from other house, internal line LED flickers. 

In direct call to other household

This function becomes available only when direct dialing system is installed. 

Incoming Call from Other House using Direct Dialing

(Maximum call time of incoming call from other house is set at 5 minutes.)

After the talk is finished, pressing the 

talk

or 

internal line

button, the talk is ended. 

In addition, when one of sender or receiver disconnect the line, the
talk is automatically ended. 

In incoming call from other house, extension 

LED on main body flickers and bell tolls. 

Then, if you want to make telephone 

talk, press the 

talk

or 

internal line

button for call connection.

extension

Dial button

internal line

talk

Содержание KHV-446S






















Отзывы: