Read before requesting the repairing works
…
Alarming Situation
�
Power connection
failure
�
Failures in
communication with
Telephone line,
common
Gate, and
guard
�
Failures in security
setting
�
Failure in releasing the
security mode
�
Failures in returning to
alarm mode
�
No call signal heard
from Gate or
guard calls
Check Points
�
Please check whether power
switch on the front-bottom side of
main body is turned on.
�
Is outside telephone line
connected to product installation
place?Is common Gate or
guard installed?
�
Isn
’
t the door open?
(security sensor works)
�
Isn
’
t the wiring for security
sensor disconnected?
�
Did you check the pertinent
security sensor?
�
Isn
’
t the wiring for pertinent
security sensor disconnected or
short-circuited?
�
Isn
’
t the door where sensor is
attached opened?
Actions
�
Turn on the power switch.
�
Try to other handset.
If no troubles are found, request A/S.
�
Contact guard to inquire whether
communication with common Gate or
guard is available.
�
Turn off and on the switch at the front-bottom side
of main body.
�
Close the door.
�
Restore the damaged wiring.
�
For normal operation of returning to alarm mode,
alarming factors should be checked and removed.
�
Restore the disconnected or short-circuited wiring
�
Close the door.
�
Turn off and on the switch at the front-bottom side
of main body.
Do not fail to check the following items before requesting the repairing works. If no troubles are found out after check, contact
KOCOM
’
s local service center.
