KNF Laboport N810, Руководство по эксплуатации

Страница: 29 / 56

LABOPORT Pumps and Systems Installation, mounting and connection
Translation of original Operating Instructions, english, KNF 121211-121345 01/10 29
7.7.2. System SH
The system SH consists of:
 Baseplate
 1 separator

1 high performance condenser
Qty Material
1
Phillips-head screwdriver No. 3
1 Allen key 5 mm
2 Tubes (see fig. 15)
 Resistant to the medium employed
 Inside diameter 10 mm
 Length: ( 1 ) approx. 150 mm, ( 2 ) approx. 220 mm
Tab. 18
WARNING
Danger of the high performance condenser bursting
 Make sure that the high performance con-
denser´s upper gas outlet is not blocked.
DANGER
Improper laying of hoses will result in damage to the
pump
 Correctly assign gas and coolant hose
connections.
 Do not reverse the gas connections’ inlets and
outlets.
1. Attach pump to the baseplate (see chapter 7.2, page 24).
2. Install the separator (see chapter 7.3, page 24).
3. Install the high performance condenser (see chapter 7.4, page
25).
4. Lay hoses for system (see fig. 15).
The condenser-connectors for the coolant require connection
tubing with an inside diameter of 8 mm.
Coolant inlet and outlet see fig. 16.
When using a coolant valve:
WARNING
Danger of the high performance condenser bursting
 Make sure that the coolant valve is mounted
between the coolant supply and the coolant inlet
port of high performance condenser.
Tools and material
Fig. 15: Tubing system SH
Fig. 16: Coolant supply of high
performance condenser
1 Coolant inlet
2 Coolant outlet