Preparing the Electric Valve Drives S 6/-12/-16 for Operation
7
Rear view of the Valve Drives S 6/-12/-16
1
RS-232 connector
2
Remote control strip
4
Power supply
5
Serial number
Fig. 4 Rear view of the valve drives S 6/-12/-16
Except for the power socket
4
and an additional ground connector
3
, the serial
RS-232 interface
1
for external computer control and the remote control inputs and
outputs
2
can be seen here.
Table 1 Terminal connections
GROUND:
Ground connector
HOME:
Sets the valve drive to position 1
FORWARD /
LOAD:
Sets the valve drive to the LOAD position or
the next higher position i.e. 2
→
3
BACKWARD / INJECT:
Sets the valve drive to the INJECT position or
the next higher position i.e. 3
→
2
OUT:
Control output in position 1 has a low-
resistance in the INJECT or in position 1 and
has a high resistance in the LOAD or in
positions 2-6 (2-16)
Depending on the DIP positions the four connectors
BIN 0
to
BIN 3
can be used
alternatively for binary event control.
Содержание Smartline S12
Страница 2: ......
