EN
| 12
EN
| 13
Fig.3
Intensity[8]
Plus button [9]
Minus button [10]
Battery charge indicator [11]
Tip [4]
Li-Ion battery [6]
Insulation surface [5]
Charging socket [7]
Fig.2
Operation
During use, the animal should be able to lean sideways, so it can main-
tain its reduced balance during immobilization.
Important:
If the animal is kept still by means of a head clamp, care
must be taken to ensure that it has sufficient freedom to move around
during the immobilization. An overly narrow head clamp during
application can lead to interruption of blood flow to the head and thus
cause considerable physical damage to the animal.
The device should be switched off whenever possible before being
inserted into the animal as well as before being removed from the
animal.
First raise the tail of the animal and insert the probe of the
switched off
device into the rectum. Place the tail to one side over the protruding
part of the handle.
Press and hold the plus button [9] for 2 seconds to switch on the device.
The animal will now lift its leg on the side to which the tail
is aligned, and will remain motionless.
The intensity of the current pulse [8] is initially 50% after switching on.
If the output intensity of the current pulse is not sufficient or too high,
increase or decrease the intensity by pressing the plus button or minus
button.
The initial value can also be adjusted individually. To do this, select the
desired value and then hold down both the plus button [9] and the
minus button [10] for 3 seconds or longer. This will save the value and
recall it the next time the Gentler is turned on.
