KLS Martin CEMOR, Инструкция по монтажу

Страница: 49 / 84

Mounting Instructions
0B
CEMOR Monitor Suspension System
Revision 1 49
Make sure the 2D VESA mount is safely in place:
•
The 2D VESA mount must butt against the TFT screen.
•
The 4 cylinder screws must be of appropriate length and tightened according to the
instructions by the manufacturer of the TFT screen.
12.5 Aligning and Securing the TFT Screens
•
Align all TFT screens, see
recommendations in section 10
“Mounting Recommendations for VESA
Brackets”, page 39.
• Press 1 locking rivet each into the
locking discs on the 2 ends of each
mounting rail
.
The 2 locking rivets protect the
TFT screens from falling off sidewards.
Make sure the locking rivets are safely in
place:
• The locking rivets must be securely
pressed into the locking discs .
Fig. 12-5: Aligning and securing the TFT screens
• For each 2D VESA mount tighten 2 slide rails using the 3 hexagon screws
M8 x 60 mm ISO 4017.
The 2 slide rails protect the TFT screens from falling off sidewards.
Make sure the 2D VESA mount
is safely in place on the mounting rail :
• The 2D VESA mount must be screwed against the mounting rail using the
2 slide rails .