KLS Martin CEMOR, Инструкция по монтажу

Страница: 39 / 84

Mounting Instructions
0B
CEMOR Monitor Suspension System
Revision 1 39
Make sure the handle on the bottom/rear or the handle on the side is safely attached.
•
The handle on the bottom/rear or the handle on the side must be attached so that
it is parallel to the mounting rails .
•
The handle on the bottom/rear must be fully engaged in the clamps .
•
The handle on the bottom/rear or the handle on the side must be fully secured
using the 4 countersunk screws for each clamp so as not to wobble.
10 Mounting Recommendations for VESA Brackets
10.1 Overview
Fig. 10-1: Mounting recommendations for VESA brackets
The following mounting recommendations apply to:
• 1D VESA bracket, 1D VESA bracket Cockpit View
•
2D VESA bracket
•
3D VESA bracket
For height adjustment of the TFT screens, the VESA mounts are equipped with rows of holes at
distances of 75 mm and 100 mm.