KLS Martin CEMOR, Инструкция по монтажу

Страница: 47 / 84

Mounting Instructions
0B
CEMOR Monitor Suspension System
Revision 1 47
12.2 Adjustment Options
The 2D VESA mount can be moved
laterally on the mounting rail .
The height of the 2 slide rails can be
fine-adjusted using the
3 hexagon screws M8 x 60 mm
ISO 4017.
The tilting angle can be adjusted in
increments of 1.5° using the eccentric
screw .
Fig. 12-2: Adjustment options of the 2D VESA mount
12.3 Preparing the Installation
For height adjustment of the TFT screens,
the 2D VESA mount
can be mounted
rotated by 180° so that a different hole
pattern results.
•
Place 2 slide rails on the
3 hexagon screws M8 x 60 mm
ISO 4017 so that the wide side
points towards the 2D VESA mount
.
•
Hang the 2D VESA mount on the
mounting rail .
•
If necessary, adjust the distance of the
optional handle on the bottom/rear
or the handle on the side , see
section 9 “Adjusting the Handles on the
Bottom/Rear or the Side”, page 38.
Fig. 12-3: Preparing the installation of the 2D VESA mount