KLS Martin CEMOR, Инструкция по монтажу

Страница: 43 / 84

Mounting Instructions
0B
CEMOR Monitor Suspension System
Revision 1 43
11.3 Preparing the Installation
• Unscrew 2 Allen cylinder head screws
M4 x 20 mm DIN 912 so far that the 1D
VESA mount/1D VESA mount Cockpit View
can be hung on the mounting rail .
•
Hang the 1D VESA mount/1D VESA mount
Cockpit View
on the mounting rail .
• If necessary, adjust the distance of the
optional handle on the bottom/rear
or
the handle on the side , see section 9
“Adjusting the Handles on the Bottom/Rear
or the Side”, page 38.
Fig. 11-3: Preparing the installation of the 1D VESA mount
11.4 Mounting the TFT Screen on the VESA Mount
•
Hold the TFT screen against the 1D VESA
mount/1D VESA mount Cockpit View
at
the desired height (see recommendations
in section 10 “Mounting Recommendations
for VESA Brackets”, page 39) and mark
the drill holes on the 1D VESA
mount/1D VESA mount Cockpit View
.
Fig. 11-4: Mounting the TFT Screen on the VESA mount