DOCUMENTATION OF AUTOMATIC CONTROL
FOR COMPACT UNITS
DTR.MCKT-HPX.
AUT-009.5.0
PAGE
GDYNIA
MCKT-HPX
2016
4/35
KLIMOR Spółka z ograniczon
ą
odpowiedzialno
ś
ci
ą
, 81-035 Gdynia, ul. B. Krzywoustego 5
Fax: (+48 58) 783-98-88; Tel.: (+48 58) 783-99-99
Service – Fax: (+48 58) 783-98-88; Tel.: (+48 58) 783-99-50/51 Mobile: (+48) 510 098 081
Information provided in this document is subject to change
email:
– Office
– Service
Picture 1
Inverter control panel for the MCKT-HPX 3
Picture 2
Description of inverter control panel for the MCKT-HPX 3
Use the [Menu] key to select one of the following menus:
Status
For readouts only.
Quick Menu
For access to Quick Menus 1 and 2, respectively.
Main Menu
For access to all parameters.
Navigation Keys
[Back]: For moving to the previous step or layer in the
navigation structure.
[
▲
] [
▼
]: For manoeuvring between parameter groups,
parameters and within parameters.
[OK]: For selecting a parameter and for accepting changes
to parameter settings.
Pressing [OK] for more than 1 s enters 'Adjust' mode. In
'Adjust' mode, it is possible to make fast adjustment by
pressing [
▲
] [
▼
] combined with [OK].
Press [
▲
] [
▼
] to change value. Press [OK] to shift between
digits quickly.
To exit 'Adjust' mode, press [OK] more than 1 s again with
changes saving or press [Back] without changes saving.
Operation Keys
A yellow light above the operation keys indicates the
active key.
[Hand on]:
Starts the motor and enables control of the
frequency converter via the LCP.
[Off/Reset]:
The motor stops except in alarm mode. In that
case the motor will be reset.
[Auto on]:
The frequency converter is controlled either via
control terminals or serial communication.
[Potentiometer] (LCP12):
The potentiometer works in two
ways depending on the mode in which the frequency
converter is running.
In
Auto Mode
the potentiometer acts as an extra
programmable analog input.
In
Hand on Mode
the potentiometer controls local
reference.
