Klimor EVO-S COMPACT, Руководство по эксплуатации и обслуживанию, Страница: 34 / 88

32
EVO-S COMPACT
COMPACT AIR HANDLING UNIT
OPERATION AND MAINTENANCE MANUAL
Tabl. 1 Basic EVO-S COMPACT parameters
Unit size
Width Height Width (*)
Framework
height
Air flow min. Air flow max.
[mm] CPR-C CPR-P RR [m 3 /h]
KLIMOR EVO-S COMPACT 5100 700 950 2760 1790 1900 120 778 2722
KLIMOR EVO-S COMPACT 3200 950 950 2760 1790 1900 120 1102 3856
KLIMOR EVO-S COMPACT 0300 950 1150 3150 2030 2100 120 1408 4927
KLIMOR EVO-S COMPACT 0400 1200 1150 3150/3450 2030/2180 2100/2400 120 1822 6376
KLIMOR EVO-S COMPACT 2500 1300 1350 3430/3730 2310/2460 2100/2400 120 2419 8467
KLIMOR EVO-S COMPACT 0600 1300 1550 3570/4120 2450/2700 2100/2600 120 2851 9979
KLIMOR EVO-S COMPACT 0700 1500 1550 4120 2700 2600 120 3326 11642
KLIMOR EVO-S COMPACT 5800 1500 1850 4200/4600 2880/3130 2400/2800 120 4082 14288
KLIMOR EVO-S COMPACT 0010 1700 1850 4400/4900 3030/3380 2600/3350 120 4666 16330
KLIMOR EVO-S COMPACT 5310 1800 2350 5170 3700 2800 120 6487 22705
KLIMOR EVO-S COMPACT 5610 2000 2550 5170/5670 3700/3950 2800/3350 120 7934 27770
*maximum length of the basic system depending on the selected
fan size (without additional functions)
If an electric heater or a single- or double-row water heater
is selected, the heater will be installed in the space of the
inter-changeable current exchanger without affecting the
length of the basic unit. In a unit with a rotary exchanger,
the basic unit will be extended. Heaters with more rows are
treated as additional functions and are available in separate
sections.
The above mentioned flow values refer to the cross-section
inside the unit.
ΔP – available pressure 0÷500/1000 Pa
Selection of AHU size is dependent on the air flow through
the filters, cooler, humidifier, AHU pressure drop and noise
level. It is possible to manufacture air handling units with
different air flow rate and pressure than those specified
in Table 1. The above mentioned flow values apply to the
AHU window. For water heaters, do not exceed the speed
of 4,5 m/s in the exchanger window, and for coolers 3,5 m/s.
2.2.2 Optimal parameters of heating, cooling and humidifying
mediums
Table 2 Medium parameters
PARAMETERS UNIT VALUE
Evaporation temperature of the cooling gas ˚ C +7
Temperature of the cooling water (glycol solution) at the
inflow:
- minimum
- maximum
˚ C
˚ C
+2
+12
Maximum temperature of heating water:
- hot
˚
C 95
Recommended available pressure:
- for a water cooler with a control node
- for a water heater with a control node
MPa
MPa 0,05÷0,1
0,01÷0,05
2.2.3 KLIMOR EVO AHU designation method
KLIMOR EVO units are normally designated by an abbrevia-
ted code according to the designation in diagram 1.
Diagram 1 Short designation of KLIMOR EVO AHUs
1 2 3 4 5
EVO-S
Compact
SIZE:
5100, 3200, 0300,
0400, 2500, 0600,
0700, 5800, 0010,
5310, 5610
AIRFLOW
DAMPER
V/100*
AVAILABLE
PRESSURE
ΔP/10*
PAGE
VERSIONS:
R – RIGHT
L _ LEFT
(*) airflow rate rounded upwards, available pressure rounded
downwards
**) customised sizes of the units
EXAMPLE:
KLIMOR EVO Compact: standard right-hand si-
ded, size 0010, air volume 10000 m
3
/h, available pressure
500Pa.
KLIMOR EVO-S COMPACT 0010 10050R
Full designation of the KLIMOR EVO AHUs includes additio-
nal codes of the air handling sections.
Diagram 2 Extended designation of KLIMOR EVO AHUs
1 2 3
4 5
VERSION:
AIRFLOW RATE
AVAILABLE
PRESSURE STR.
VERSIONS:
SECTION
CODE:
acc. to the
Table 3
FC
ELASTIC
CONNEC-
TION
AD
SHUT-OFF,
REGULATING
DAMPER
OPCJE
O – external
version
CS – Control
system included
EXAMPLE: the KLIMOR EVO AHU in standard right-side
version with complete control system, size 0010, air flow:
10,000 m
3
/h, available pressure: 500 Pa, equipped with the
cartridge filter, water heater, water cooler, fan, heat recovery
cross-flow exchanger and connectors
KLIMOR EVO-S COMPACT 0010 10050RPFCPRWHVF-
FCAD/10050LPFCPRVFFCADCS