Klimor EVO - H, Руководство по эксплуатации и обслуживанию

Страница: 81 / 178

79
F7 and F9 bag filters
The F7/F9 bag filters are designed for secondary air treat-
ment.
The filters are mounted in guides with seals and a slat
clamp that is locked on an eccentric connection mech-
anism (Fig. 42).
Separators from the metal section with seals are mounted
between the filters.
When replacing the filters, it is recommended to replace
the self-adhesive seal fixed inside the guide.
F7/F9 bag filters are not to be regenerated and he be re-
placed with new ones.
The dimensions of the filters used are specified in the KT
certificate.
Table 16. Dimensions and quantities of bag filters
Size
EVO W H Pcs. Size
EVO W H Pcs.
[mm] - [mm] -
5100 600 350 1 5610 629 1150 3
3200 422 350 2 0020 570 1150 4
5200 600 550 1 0120 560 821 6
0300 422 450 2 5320 570 1350 4
0400 547 450 2 0720 629 921 6
2500 597 550 2 0230 670 771 8
3500 422 800 2 0530 745 771 8
0600 597 650 2 0930 762 1121 6
0700 697 650 2 0040 745 921 8
5800 697 800 2 0050 895 921 8
8800 547 1050 2 0060 895 1121 8
0010 797 797 2 0070 970 1171 8
5010 597 1150 2 0090 1120 1321 8
5310 560 1050 3 0001 1195 1321 8
4410 697 1350 2 0021 1270 1471 8
Table 16a Standard dimensions and quantities of bag filters
Size
EVO*
W H Pcs W H Pcs W H Pcs
[mm] - [mm] - [mm] -
5200 592 490 1
2500 592 490 2
3500
490 490 1 287 490 1 490 287 1
287 287 1
0600 592 592 2
0700 592 592 1 490 592 1 287 592 1
5800
592 490 1 490 490 1 287 490 1
592 287 1 490 287 1 287 287 1
8800 592 490 2 490 490 2
0010
592 490 1 490 490 2 592 287 1
490 287 2
5010 592 592 2 592 490 2
Size
EVO*
W H Pcs W H Pcs W H Pcs
[mm] - [mm] - [mm] -
5310 592 490 4 490 490 2
4410
592 490 2 490 490 2 287 490 2
592 287 1 490 287 1 287 287 1
5610
592 592 1 490 592 2 287 592 1
592 490 1 490 490 2 287 490 1
0020
592 592 3 490 592 1 592 490 3
490 490 1
0120
592 592 2 490 592 1 592 490 4
490 490 2
5320
592 490 6 490 490 2 592 287 3
490 287 1
0720 592 592 3 490 592 6 287 592 3
0230
592 592 8 592 287 4 287 592 2
287 287 1
0530 592 592 10 592 287 5
0930
592 592 6 592 490 6 490 592 2
490 490 2
0040 592 592 15
0050 592 592 18
0060 592 592 12 592 490 12
0070
592 592 18 592 490 6 287 592 3
287 490 1
0090
592 592 21 592 490 7 592 287 7
287 592 3 287 490 1 287 287 1
0001 592 592 24 592 490 8 592 287 8
0021
592 592 32 592 490 8 287 592 4
287 490 1
*) does not apply to KLIMOR EVO size centrals: 5100, 3200, 0300 and
0400)
Mounting of F7/F9 bag and minipleat filters in guides.
1. Pull the slider towards you, lock the sliders of the guides
(mandrel Ø4x40).
2. Fold the filter bags. This prevents the bags from getting
caught in the guide elements.
3. Slide the filters into the guide using sealing separators.
4. Remove the guide locks.
5. Push the filter and slide the slider as far as it will go.
6. Lock the pressed slider
Separators mounted between the filters are not
included in the service equipment and cannot by
replaced with new ones. Therefore, when repla-
cing the filters, they must be secured for reuse.
Lack of separators will result in bypass air flow
bypassing the filters.