Klever Q-Powe, Руководство пользователя

Страница: 37 / 72

37
the BiCyCle
bike and the knurled nut is fastened tightly by hand. The levers
have to be closed with force now, but only with this they have
enough grip on the seat post. It´s easiest to grab the seat post
or tube with your fingers and move the lever with your palm.
The distance between saddle and handlebar (by pushing the
saddle forward or backward) and the saddle angle are adjusted
by the saddle clamping screws (Image 36) of the seat post. The
saddle should generally be positioned horizontally.
Attention: please pay attention to the approved
torques when tightening the saddle clamp screws
to the correct torque (see chapter 11, Technical
data).
Caution: The saddle with the seat post may never
be installed over the minimum mark on the seat
post (image 37). During riding operation, the post
might break or the frame might be damaged.
Handlebar adjustment
The position of the handlebar depends on the Seat position
you would like to have on your bike. You can optimal your seat
position by adjust the handlebars angle to your needs, (image
38).
Your dealer will be happy to advise and install the most
appropriate stem for your needs and will adjust the handlebar
position.
If you should like to change the position after some time,
please do the following:
Loosen the clamp screws of the stem where the handlebar is
clamped carefully. (image 39)
Then turn the handlebar according to your wishes. Your wrists
should be as relaxed as possible and not turned too far to the
outside. Then pull gently on the handlebar clamp bolts of the
stem back and pay attention to the maximum torque of the
screws. (max. 5,5. Nm).
Please note that now the brake levers and the gear shifter
have changed their position.
image 37
image 36
image 38
Minimum
Insert mark
image 39
Quick release
lever
Saddle clam -
ping screws