Klever Q-Powe, Руководство пользователя

Страница: 62 / 72

62
wear
14. Wear
Your Pedelec as technical product consists of many com-
ponents, which are subject to normal wear due to their
function. Therefore, all the following components should be
regularly checked and if necessary replaced immediately:
1. Brake Discs and pads
are claimed during each braking
operation and worn appropriately. Therefore, they must be pe -
riodically reviewed and if necessary, be replaced immediately.
2. Tires and tubes
are subject to a function-related wear and
should be checked regularly. Regularly check the air pressure
and tread depth. The air pressure should always be at the
manufacturer‘s recommended operating pressure, which is
printed on the tire sidewall. Is the profile of the tire no longer
deep enough or the tire has cracked sidewalls, it should be
replaced immediately.
3. Rims and spokes
are stressed at every braking or driving
over an obstacle. Regularly check the concentricity of the rim
and the spoke tension. If the wheel has a radial or axial offset,
it should be readjusted immediately. In the event of breakage
of a spoke, the broken spoke should be immediately replaced
and the wheel has to be centered.
4. Chain, sprocket, chain wheels and derailleur rolls
wear
out normally at every time. Regular cleaning and lubrication
of these components can be extended considerably their
service life. They should, however, if they are worn be replaced
immediately.
5. Shifting and brake cables
must be maintained regularly
and replaced if necessary. Especially the bike is often parked
outdoor and exposed to the weather.
6. Hydraulic oils and lubricants
change over time and lose
their effectiveness. Therefore, all lubrication points are regu -
larly cleaned and re-greased to minimize the wear.
7. The painting
requires regular care. Check regularly all the
paintwork for damage and rectify this immediately. The points
at which cables can rubbing the painting, you should be pro
-
tect them with a little clear, transparent film.