Klever Q-Powe, Руководство пользователя

Страница: 32 / 72

32
klever moBility ProPulsion system
State of
charge Charger LED Battery LED Note
Flashing Red Error detected. Reset by re-plugging AC
to main
Steady Red Ready to be connected to battery
0% Flashing Yellow Flashing Red Recovering battery from very low state
of
charge Steady Yellow Flashing Red Normal charging
<35% Steady Yellow Flashing Red Normal charging
35 – 75% Steady Yellow Flashing Yellow Normal charging
75 – 90% Steady Yellow Flashing Green Normal charging
>90% Flashing Green Flashing Green Final charging
100 % Steady Green => no LED Fully charged
Make sure that the battery is no longer connected
to the charger, after the successful charge process.
Likewise, the charger should be disconnected from
the power supply.
Battery and charger become warm during charging. Ensure
adequate ventilation of the battery and charger. The vents
should not be covered.
Place the charger and battery on clean surfaces. Prevent
contamination of the charging socket on the charger and the
battery.
Avoid humidity and direct sunlight.
Attention! If the charger is damaged, please con -
tact an authorized retailer. Never open the charger
yourself.
The charging time for a full charge (from 0 to 96% capacity) is about four hours (100%-6 hours).
The LED lights on the charger and battery documents the state of the charge process: