Klever Q-Powe, Руководство пользователя

Страница: 41 / 72

41
the BiCyCle
Attention! New brake pads must be broken in
to achieve their optimal deceleration values. By
braking at least 30 times from approximately 30
km/h the brake pads will achieve their maximum
brake power.
Not properly broken in brakes do not reach their optimal dece -
leration values and are prone to vibrations and loud squealing.
The brake pads and rotors must be regularly checked for wear.
If Disc and brake pads are worn, they will need to be replaced.
Changes in the brake performance with loss of brake power
or you if can push the lever through to the handlebar without
any braking effect, air could have come into the brake system
and must be removed by bleeding the brake. This and the
replacement of worn brake pads and discs should be done by
an authorized dealer.
Attention! Oiled brake pads and discs can reduce
the effect of the brake substantially. Prevent in any
case, while cleaning the bike and lubricating the
chain that oil or other liquids can contaminate the
brake pads and brake discs.
Contaminated brake pads cannot be cleaned and
need to be replaced. You can clean the disc with
brake cleaner or warm water and a little detergent
if necessary.
! Please drive very carefully in wet weather condi
-
tions. Moisture may cause longer braking distances.
For further information on brake, brake pads, brake disc and
the wear limit of them, read the operation manuals supplied
by the manufacturer.