Klever Q-Powe, Руководство пользователя

Страница: 31 / 72

31
klever moBility ProPulsion system
6.4.1 Charging the battery
You can charge the battery on or off bike (e.g. important in
winter) Charging at any time, even after a partial discharge
(e.g. after a short distance of a few kilometers) is possible.
There is no need to wait until it is completely discharged, as it
has no memory effect.
To remove the battery pack, refer to Chapter 6.5.3. Disassem -
bly and assembly of the battery.
Caution! Charge the battery only with the sup-
plied and provided battery charger.
For the technical data of the charger please read chapter 11.
Technical data.
To charge the battery, do the following: You can monitor the
charging process on the basis of the indicator LEDs on the
charger and battery.
Connect the power cable to the charger.
■
Insert the power plug of the charger into the wall socket,
■
the LED lights solid red the charger is ready to charge
(Image 31)
Connect the charging socket of the charger into the socket
■
of the battery, the charging process will start automatically
(Image32a und 32b)
The LED on the charger switches to flashing yellow light,
■
charging begins
The LED indicator turns to yellow continuous light, the bat -
■
tery is charged to about 35%, The charging is in progress
The LED changes to flashing green, the battery is to about
■
75 - 90% charged
The LED comes on solid green, the battery is now fully
■
charged, the charging is complete
Disconnect the power plug from the Wall socket
■
Unplug the charger socket of the charger from the battery
■
image 31
image 32a
Power cord Charger Charging cable
Charger
image 32b
Charger