Klein Marine Systems, Inc. HYDROCHART 3500, Руководство по эксплуатации и обслуживанию

Страница: 43 / 86

Disassembling and Reassembling the Sonar Head Unit
4-5
7.
If it is required to remove
the transducer arrays, use
the 4-mm hex key to
remove the four M5 x 20
mm socket head cap
screws and rubber washers
that secure each of them to
the frame. With the screws
removed, the transducers
will separate from the
frame.
To continue with the removal
of the sonar electronics
chassis:
8.
Using the 4-mm hex key,
tighten the two socket
head cap screws in the
sonar electronics housing
connector end cap.
Figure 4-6:
Socket Head Cap Screws Securing
the Transducer Arrays
Socket head
cap screws (4)
Transducer
array (stbd)
Figure 4-7:
Tightening the Socket Head Cap
Screws in the Sonar Electronics Housing
Connector End Cap
Socket head
cap screw (2)
Connector
end cap